AFL-xxx-CX2 Panel PC
Page 105
Power Off DEFAULT
The system remains turned off
Power On
The system turns on
Last State
The system returns to its previous state. If it was on, it
turns itself on. If it was off, it remains off.
Resume on Lan/Ring [Disabled]
Use the Resume on Lan/Ring BIOS option to enable activity on the RI (ring in) modem
line to rouse the system from a suspend or standby state. That is, the system will be
roused by an incoming call on a modem.
Disabled DEFAULT
Wake event not generated by an incoming call
Enabled
Wake event generated by an incoming call
Resume on PME# [Disabled]
Use the Resume on PME# BIOS option to enable activity on the PCI PME (power
management event) controller to rouse the system from a suspend or standby state.
Disabled DEFAULT
Wake event not generated by PCI PME controller
activity
Enabled
Wake event generated by PCI PME controller activity
Resume On RTC Alarm [Disabled]
Use the Resume On RTC Alarm option to specify the time the system should be roused
from a suspended state.
Disabled DEFAULT
The real time clock (RTC) cannot generate a wake
event
To Next Page
Loading...
Need help?
General
