AFL-xxx-CX2 Panel PC
Page 112
5.5.3 Hard Disk Drives
Use the Hard Disk Drives menu (BIOS Menu 17) to specify the boot sequence of the
available HDDs. When the menu is opened, the HDDs connected to the system are listed
as shown below:
1st Drive [HDD: PM-(part number)]
NOTE:
Only the drives connected to the system are shown. For example, if
only two HDDs are connected only “1st Drive” and “2nd Drive” are
listed.
The boot sequence from the available devices is selected. If the “1st Drive” option is
selected a list of available HDDs is shown. Select the first HDD the system boots from. If
the “1st Drive” is not used for booting this option may be disabled.
BIOS Menu 17: Hard Disk Drives