IEI Technology AFL-xxx-CX2 User Manual

AFL-xxx-CX2 Panel PC
Page 52
Figure 3-7: AFL-12B-CX2 Bracket Retention Screws
Step 4: Attach the hard drive bracket to the hard drive. To do this, align the four retention
screw holes in the both sides of the hard drive bracket with the retention screw
holes on the sides of the hard drive. Insert four retention screws into the hard
drive bracket (
Figure 3-8).
Figure 3-8: AFL-xxx-CX2 Hard Drive Retention Screws
Step 5: Connect the SATA/IDE cable to the rear of hard drive.

IEI Technology AFL-xxx-CX2 Specifications

General

Brand	IEI Technology
Model	AFL-xxx-CX2
Category	Touch Panel
Language	English