AFL-xxx-CX2 Panel PC
Page 50
Figure 3-4: AFL-12B-CX2 Back Cover Retention Screws
Step 2: Locate the CompactFlash® card slot. Insert a CompactFlash® card into the slot
(
Figure 3-5).
Figure 3-5: CompactFlash® Card Slot Location
Step 3: Replace the plastic back cover. Once replaced, fasten the previously removed
retention screws. Step 0:
3.6 Hard Drive Installation
The AFL-12B-CX2 has space for a hard drive. To install the hard drive, please follow the
steps below: