IEI Technology AFL-xxx-CX2 User Manual

AFL-xxx-CX2 Panel PC
Page 51
Step 1: Remove the plastic back cover. See Section 3.5 above.
Step 2: Remove the retention screws securing the internal aluminum cover (
Figure 3-6)
and lift the aluminum cover off the panel PC.
Figure 3-6: AFL-12B-CX2 Cover Retention Screws
Step 3: Remove the four hard drive bracket retention screws (
Figure 3-7) and lift the
hard drive bracket off the panel PC.

IEI Technology AFL-xxx-CX2 Specifications

General

Brand	IEI Technology
Model	AFL-xxx-CX2
Category	Touch Panel
Language	English