AFL-xxx-CX2 Panel PC
Page 117
1 GB
VGA Frame Buffer Size [64 MB]
Use the VGA Frame Buffer Size option to set the size of the VGA buffer. The following
options are available.
8 MB
16 MB
32 MB
64 MB D
EFAULT
128 MB
Select Display Device [CRT+LCD]
Use the Display Device Select BIOS feature to determine what displays are used. Dual
display functionality is enabled here. Dual display configuration options are listed below:
CRT
LCD
CRT + LCD
DEFAULT
Panel Type Control by [Auto]
Use the Panel Type Control by option to set the panel settings through the BIOS or with
jumper settings. Configuration options are listed below:
Auto DEFAULT
The panel is selected with jumper JP2
Manual
The panel type is selected through the BIOS
Panel Type
The Panel Type setting chooses the type of display. Options are shown below.
0 – 640 x 480 x 18
1 – 800 x 600 x 18
2 –1024 x 768 x 18
4 – 1280 x 1024 x 36
To Next Page
Loading...
Need help?
General
