AFL-xxx-CX2 Panel PC
Page 180
o Channel mode for 5.1 speaker output
o Synchronize the phone jack switch with speakers settings
Speaker Test - Each speaker connected to the system is tested individually
to see if the 4-channel or 6-channel audio operates properly.
S/PDIF-In & S/PDIF-Out - S/PDIF is used to transmit digital and analog audio
signals with either a 48 or 44.1 KHz sample rate.
HRTF Demo - Adjust HRTF (Head Related Transfer Functions) 3D positional
audio before running 3D applications.
Microphone Effect - Microphone noise suppression is enabled in this menu.
General - General information about the installed AC’97 audio configuration
utility is listed here.
To Next Page
Loading...
Need help?
General
