IMO HD2-3.7A-43 - Page 188

HD2 Series Inverter Function Parameter List
-179-
Function
code
Name
Description
Default
value
Modify
P07.12
Temperature of
inverter module
-20.0–120.0°C
/
●
P07.13
Software version
of control board
1.00–655.35
/
●
P07.14
Accumulated
running time
0–65535h
/
●
P07.15
High bit of
inverter power
consumption
Display the power consumption of the inverter.
inverter power
consumption=P07.15×1000+P07.16
Setting range of P07.15: 0–65535 kWh (×1000)
Setting range of P07.16: 0.0–999.9 kWh
/
●
P07.16
Low bit of inverter
power
consumption
/
●
P07.17
Reserved
/
/
P07.18
Rated power of
inverter
0.4–3000.0kW
/
●
P07.19
Rated voltage of
inverter
50–1200V
/
●
P07.20
Rated current of
inverter
0.1–6000.0A
/
●
P07.21
Factory barcode 1
0x0000–0xFFFF
/
●
P07.22
Factory barcode 2
0x0000–0xFFFF
/
●
P07.23
Factory barcode 3
0x0000–0xFFFF
/
●
P07.24
Factory barcode 4
0x0000–0xFFFF
/
●
P07.25
Factory barcode 5
0x0000–0xFFFF
/
●
P07.26
Factory barcode 6
0x0000–0xFFFF
/
●
P07.27
Present fault type
0: No fault
1: Inverter unit U phase protection (OUt1)
2: Inverter unit V phase protection (OUt2)
3: Inverter unit W phase protection (OUt3)
4: Overcurrent during acceleration (OC1)
5: Overcurrent during deceleration (OC2)
6: Overcurrent during constant speed (OC3)
7: Overvoltage during acceleration (OV1)
8: Overvoltage during deceleration (OV2)
9: Overvoltage during constant speed (OV3)
10: Bus undervoltage fault (UV)
11: Motor overload (OL1)
12: inverter overload (OL2)
/
●
P07.28
Last fault type
/
●
P07.29
2nd-last fault
type
/
●
P07.30
3rd-last fault type
/
●
P07.31
4th-last fault type
/
●
P07.32
5th-last fault type
/
●