IMO HD2-3.7A-43 - Page 238

HD2 Series Inverter Function Parameter List
-229-
Function
code
Name
Description
Default
value
Modify
P17.26
Current running
time
Display current running time of the inverter.
Range: 0–65535min
0m
●
P17.27
Acutal stage of
simple PLC
Displays the present stage of the simple PLC
function.
Range: 0–15
0
●
P17.28
Motor ASR
controller output
Display the speed loop ASR controller output value
under vector control mode, relative to the
percentage of rated torque of the motor.
Range: -300.0%–300.0% (of the motor rated
current)
0.0%
●
P17.29
Pole angle of
open-loop
synchronous
motor
Display initial identification angle of synchronous
motor
Range: 0.0–360.0
0.0
●
P17.30
Phase
compensation of
synchronous
motor
Display phase compensation of synchronous
motor
Range: -180.0–180.0
0.0
●
P17.31
High-frequency
superposition
current of
synchronous
motor
0.0%–200.0% (of the motor rated current)
0.0
●
P17.32
Motor flux linkage
0.0%–200.0%
0.0%
●
P17.33
Exciting current
reference
Display the exciting current reference value under
vector control mode
Range: -3000.0–3000.0A
0.0A
●
P17.34
Torque current
reference
Display torque current reference value under
vector control mode
Range: -3000.0–3000.0A
0.0A
●
P17.35
AC incoming
current
Display the valid value of incoming current on AC
side
Range: 0.0–5000.0A
0.0A
●
P17.36
Output torque
Display output torque value, during forward
running, positive value is motoring state, negative
value is generating state; during reverse running,
positive value is generating state, negative value is
motoring state.
0.0Nm
●