IMO iSmart V4 - Page 64

Chapter 3 Program Tools 53
Press the Button
Button
Description
SEL
1. Ixx ⇒ ixx ⇒ ── ⇒ space ⇒ Ixx (only for digital and character position of 1, 3, 5 column)
2. Qxx ⇒ space ⇒ Qxx (only for digital and character position of 8 column)
3. ┬
⇒ Space⇒ ┬ (all available but the 2,4,6 column of the first line)
┴
┴
SEL,
then ↑/ ↓
1. I ⇔ X ⇔ Z ⇔Q ⇔ Y⇔ M ⇔ N ⇔J⇔K⇔ D ⇔ T ⇔ C ⇔ R ⇔ G ⇔ F⇔ I (the cursor
located at 1, 3, 5 column)
2. Q ⇔ Y ⇔ M ⇔ N ⇔ T ⇔ C ⇔ R ⇔ G ⇔H ⇔ L ⇔P ⇔ S ⇔ AS ⇔ MD ⇔ PI ⇔ MX ⇔
AR ⇔ DR ⇔ MU ⇔Q (When the cursor located at 8 column)
3. ( ⇔  ⇔  ⇔ P ⇔ ( (When the cursor located at 7 columns, and the 8 c
olumn is set as Q,
Y, M , N)
4. ( ⇔ P ⇔ ( (When the cursor located at 7 columns, and the 8 column is set as T)
SEL ,
then ←/→
Confirm the input data and move the cursor.
↑ ↓ ← →
Move the cursor.
DEL
Delete an instruction.
ESC
1. Cancel the Instruction or action under Edition.
2. Back to Main Menu after query the program (save program to flash).
OK
1. Confirm the data and automatically save, the cursor moves to next input position.
2. When the cursor is on Column 8, Press the button to automatically enter the function blocks
and set the parameters (such as T/C…).
SEL+DEL
Delete a Line of Instruction.
SEL+ESC
Display the number of the Lines and operation state of iSmart (RUN/STOP).
SEL+
↑
/
↓
Skip up/ down every 4-line program.
SEL+OK
Insert a space line
O
peration Sample: more detailed to see Appendix A: Keypad programming in Ladder mode.