Inovance H3U Series - Preface; Approvals and Compliance

1
Introduction
Introduction
The H3U series programmable logic controller (PLC) is a third-generation high-performance compact-sized PLC
developed by Inovance Technology based on the MCU and FPGA architecture. The product has a high-speed
input frequency of 8 x 200 kHz, and a high-speed output frequency of 5 x 200kHz, supporting more and faster
high-speed pulse output ports. It supports S-curve acceleration/deceleration, and multiple positioning methods (for
example, interrupt positioning and multi-speed positioning). Motion control PLCs support 3 x 500 kHz high-speed
differential output, 2- or 3-axis linear interpolation, 2-axis arc interpolation, helix interpolation, and 3-axis electronic
cam or G-code input.
The main module has Ethernet communication functions for seamless integration with automation and information.
It supports CANlink and CANopen bus for CAN communication and allows easy networking through graphical
conguration. It supports USB communication featuring quick commissioning.
Based on the advanced programming environment AutoShop, the product supports programming languages such
as ladder chart, instruction list, and sequential function chart (SFC). It supports user programs of up to 64,000
steps and 40,000 power-failure storage word elements. Data and user programs are stored in the ash drive
with no battery. It provides a variety of commissioning methods, including online modication and oscilloscope
functions.
This product is applicable in the automatic equipment industry, mainly in advanced manufacturing sectors,
including the production line automation, wood-working machinery, glass machinery, transportation, loading/
unloading, and electronical customization.
All the intellectual property rights of this manual are reserved by Shenzhen Inovance Technology Co., Ltd.
Inovance will continuously optimize and improve our products, and upgrade this manual accordingly. The manual
may be updated without notication. You can visit our website to download the latest version.
Your feedback on this manual is welcomed through any of the following methods.
☆ Website: www.inovance.cn
☆ Email: plc@inovance.cn
Related Manuals
This manual describes information about the H3U series software, mainly the differences between H2U-XP and
H3U, including the scope of elements, special elements, trajectory control, electronic cams, G-code, extension
modules, and CANopen.
You can download it from the website www.inovance.cn.