Inovance H3U Series - Canlink Remote Extension Module

684
10
10 Extension Modules 10.3.2 CANlink Remote Extension Module
10.3.2 CANlink Remote Extension Module
The CANlink bus can be used to connect to H2U series remote modules for remote extension.
The following gure shows the network diagram of connection between the H3U and H2U series remote
modules over the CANlink bus.
24 V power
supply
Terminal
resistor
CANlink bus
H2U remote
expansion module
Terminal
resistor
H2U remote
expansion module
For details about the conguration of H3U CANlink communication, see section
Page 616, “9.6 CANlink
Communication”
.