Inovance H3U Series - Canlink Software Configuration

622
9
9 Communication9.6.3 CANlink Software Conguration
9.6.3 CANlink Software Conguration
Take the following steps to congure a CANlink network.
● Congure the CANlink network through AutoShop and dene the data to be exchanged.
● Download congurations to the
H3U
PLC.
● Enable the CANlink network on the PLC and other programmable devices. Unless otherwise indicated,
the CANlink network is enabled in the
H3U
extension module by default. In addition, on a PLC with
CANlink conguration, congure the CANlink network through the user program.
1) Master CANlink station conguration
a) Choose
Project Manager
>
Communication Cong
. Double-click
CAN Port
. The following
window is displayed.
Select
CANlink
and click
OK
.