Inovance H3U Series - Matrix Instructions; BK+ Matrix Addition Operation; BKCMP= Matrix Equal-To Comparison (S1 = S2); Bkcmp= (S1 ＝ S2)

214
4
4 Instructions4.5.5 Other Data Processing
ANR: Annunciator reset
◆
Overview
When driving conditions are met, the ANR instruction resets the annunciators in the range S900 to S999 in
batches.
ANR
Annunciator reset Applicable model:
H3U
No operand
16-bit instruction
(1 step)
ANR: Continuous
execution
ANRP: Pulse
execution
4.6 Matrix Instructions
Matrix
operations
BK+ Matrix addition operation
-
BK- Matrix subtraction operation
MAND Matrix AND operation
These instructions perform bit-based
operation on a set of word elements.
32-bit operation is not supported. Pulse
operation is supported.
MOR Matrix OR operation
MXOR Matrix XOR operation
MXNR Matrix XNR operation
MINV Matrix inverse operation
MBC
Matrix bit status counting
operation
Matrix
comparison
BKCMP=
Matrix equal-to comparison
(S1 = S2)
-
BKCMP>
Matrix greater-than
comparison (S1 > S2)
BKCMP<
Matrix less-than comparison
(S1 < S2)
BKCMP<>
Matrix not-equal-to
comparison (S1 ≠ S2)
BKCMP<=
Matrix less-than-or-equal-to
comparison (S1 ≤ S2)
BKCMP>=
Matrix greater-than-or-equal-
to comparison (S1 ≥ S2)
MCMP Matrix comparison operation
These instructions perform bit-based
operation on a set of word elements.
32-bit operation is not supported. Pulse
operation is supported.
Matrix read/
write
MBRD Matrix bit read operation
MBWR Matrix bit write operation
Matrix
rotation and
shift
MBS Matrix bit shift operation
MBR Matrix bit rotation operation