64
4
4 Instructions4.1.3 Output Instructions
When R200 = 4 and M100 = ON, bit 4 of D100 is set to get the result D100 = 2#11110 (decimal K30).
When M100 = OFF, bit 4 of D100 is reset to get the result D100 = 2#1110 (decimal K14).
BSET : Bit data setting
◆
Overview
When the BSET instruction is driven, the element designated by this instruction is set to ON and remains
so. The BRST instruction sets this element to OFF regardless of whether the BSET instruction is still driven.
BSET D n
Bit data setting Applicable model:
H3U
D Output
data
Element number of the output data 16-bit instruction (5
steps)
BSET: Continuous
execution
32-bit instruction (9
steps)
DBSET:
Continuous
execution
n Output bit Designated output bit; value range: 0 to 15 (16-bit
instruction) or 0 to 31 (32-bit instruction)
Operand
Bit Element Word Element
System·User System·User Bit Designation Indexed Address Constant
Real
Number
D X Y M T C S SM D R T C SD KnX KnY KnM KnS KnSM
V,Z
Modication K H E
n X Y M T C S SM D R T C SD KnX KnY KnM KnS KnSM
V,Z
Modication K H E
Note: The elements in gray background are supported.
◆
Application
When M100 = ON:
To Next Page
Loading...
