58
4
4 Instructions4.1.2 Combined Instructions
MPS: Stack-based storage; MRD: Stack read; MPP: Stack read
ANB Serial connection of circuit blocks
Number of steps: 1 step
ORB Parallel connection of circuit blocks
Number of steps: 1 step
Instruction Operand
ANB None
ORB
The objects of a block operation are the computing ows within the latest two
LD (or LDI, LDP, or LDF) ranges.
Use the ANB and ORB instructions to perform an AND or OR operation on the previously saved logical
operation result and the content of the cumulative cache.
(Y0)
ANB
ORB
(M0)
☟
☜
X0
X2
X4
X3
X5
X6
X7
X1
☛LD X0
OR X1
☛LD X2
OR X3
☞ANB
OUT M0
☛LD X4
AND X5
☛LDI X6
AND X7
☞ORB
OUT Y0
MPS stack-based storage, MRD stack read, and MPP stack read
MPS Stack-based storage
Number of steps: 1 step
MRD Stack read (ow pointer
unchanged)
Number of steps: 1 step
MPP Stack read
Number of steps: 1 step
Instruction Operand
MPS, MRD, and MPP None
Use the MPS instruction to store the content of the cumulative cache in the stack. (The stack pointer is
incremented by 1.)
Use the MRD instruction to read stack content and store the content in the cumulative cache. (The stack
pointer remains unchanged.)
Use the MPP instruction to retrieve the previously saved logical operation result from the stack and store it
in the cumulative cache. (The stack pointer is decremented by 1.)
(
Y1)
X1
X2
(
M1)
X0
X0
(Y0)
MPS
MPP
MRD
M
0
LD X1
AND M0
MPS
AND X0
OUT M1
MRD
AND X2
OUT Y0
MPP
ANI X0
OUT Y1
To Next Page
Loading...
