Section 1 - General Information
Service Tools
Tool Detail Reference Section B - Body and Framework
1 - 14 1 - 14
9803-9450-1
Fig 10.
Fig 11.
240V Static Oven - available with 2 or 6 cartridge capacity
- required to pre-heat adhesive prior to use. No plug
supplied. Note: 110V models available upon request -
contact JCB Technical Service.
Glass Lifter - minimum 2 off - essential for glass
installation, 2 required to handle large panes of glass.
Ensure suction cups are protected from damage during
storage.
JCB part number: JCB part number - 892/00842
992/12400 - 2 Cartridge x 240V9
992/12600 - 6 Cartridge x 240V
Fig 12.
Fig 13.
Wire Starter - used to access braided cutting wire (below)
through original polyurethane seal.
Cut-Out Knife - used to remove broken glass.
JCB part number - 892/00848 JCB part number - 992/12800
To Next Page
Loading...
