Section 1 - General Information
Service Tools
Tool Detail Reference Section B - Body and Framework
1 - 15 1 - 15
9803-9450-1
Fig 14.
Fig 15.
Glass Extractor (Handles) - used with braided cutting wire
(below) to cut out broken glass.
'L' Blades - 25 mm (1 in) cut - replacement blades for cut-
out knife (above).
JCB part number - 892/00846 JCB part number - 992/12801 (unit quantity = 5 off)
Fig 16.
Fig 17.
Braided Cutting Wire - consumable heavy duty cut-out
wire used with the glass extraction tool (above).
Long Knife - used to give extended reach for normally
inaccessible areas.
JCB part number - 892/00849 (approx 25 m length) JCB part number - 892/00844
To Next Page
Loading...
