Swashplate Timing: Aileron-to-Elevator (Corrects Rolling Maneuvers)
H-37
This form of mix functions and is set up exactly as we
have outlined in the Elevator-to-Aileron Mix section, and
allows the helicopter to roll more axial along the Tail
Boom of the model by adding a slight amount of Elevator
to each direction of Aileron.
Setup Tip: Most helicopters that have a Clockwise
Rotation Rotor require a small amout of Up Elevator
for right rolls, and a small amount of Down Elevator
for left rolls.
Highlight and select one of the Standard Programmable
Mixers (P ROG.MIX3PROG.MIX6) to obtain the first
Programmable Mix display. Then press ACT next to
CLR or highlight and select INH to obtain the main mix
display. The example is using PROG.MIX3.
To Next Page
Loading...
