Flap and AUX Functions
S-14
The Flap and Auxiliary functions can be assigned to
operate from several different switches, buttons or the
throttle stick. In device select, highlight the desired flap
or aux function and press the Selector to access the
available switches that can be programmed to operate
each function.
Select the desired switch by highlighting it and press
the Selector.
Activating / Inhibiting Channels
Channels 5 (motor), 7–9 can be inhibited, allowing them to
be used as slave channels, in programmable mix. Highlight
the desired ACT/INH below the appropriate channel. Press
the Selector to inhibit or activate the channel.
To Next Page
Loading...
Need help?
General
