Model Select
S-3
Model select allows up to 30 different models to be stored
and selected.
Note: When setting up a new model it is
recommended that an unused model memory is
selected. If a current model memory is selected it’s
recommended that the model be reset to factory
default setting before programming the new model.
See model reset page S-7.
1. In the SYSTEM Menu, highlight and select Model SEL
using the Selector.
2. Use the Selector to highlight and select the desired
model number to be used.
3. Return to the SYSTEM Menu by pressing the
LIST button.
To Next Page
Loading...
Need help?
General
