System Mode
System Mode
Model Reset Pg. S-7
Type Select Pg. S-6
Info Display
Model Select Pg. S-3
Model Name Pg. S-6
Transfer Pg. S-8
Trim Step Pg. S-10
Device Select Pg. S-11
Wing Type Pg. S-15
S-2
System mode contains the foundational programming.
System mode screens include model name,
model reset, modulation, data transfer, etc.—functions
that are typically set once and then are seldom
changed or adjusted.
To enter System Mode:
Press ENT and hold while turning on the transmitter.
The screen should appear as follows.
System mode contains the follow screens:
To Next Page
Loading...
Need help?
General
