Step #26 Aileron-to-Flap
Step #27 Aileron Differential
S-58
This function gives added roll response by mixing
ailerons to flaps such that the entire trailing edge
functions as an aileron. In
FUNC.LIST rotate the Selector
until
AILFLP M is highlighted. Press the Selector to
access the Aileron-to-flap mix. Rotate the Selector to
highlight
CRU then press the Selector selecting Pos1.
In
FUNC.LIST rotate the Selector until DIFFEREN. is
highlighted. Press the Selector to access the Aileron
differential menu. Rotate the Selector to highlight the
cruise aileron value then press the Selector to access
that value. With the flight mode switch in the middle
This will apply the same vales as selected previously in
the launch mode to the cruise. If you choose a different
aileron-to-flap value, then select
Pos0 and adjust the
Pos0 value to achieve the desired results. Press the LIST
button to return to the Function Mode screen.
cruise mode, give a full right aileron command and rotate
the Selector to achieve the desired aileron differential for
cruise. Pressing the Selector will store the value. Now
rotate the Selector to highlight the cruise flap value and
adjust it to the desired position. Press the LIST button to
return to the Function Mode screen.
To Next Page
Loading...
Need help?
General
