Aileron-to-Rudder Mix
S-25
Aileron-to-rudder mix causes the rudder to move in
unison with ailerons. It is utilized to reduce adverse yaw
and to improve the turning/ handling characteristics.
Aileron-to-rudder mix values can be independently
adjusted right and left for each of the 5 flight modes.
To access Aileron-to-Rudder mix, in FUNC.LIST rotate
the Selector until
AILRUD M is highlighted. Press
the Selector to access the aileron-to-rudder mix menu.
Rotate the Selector to highlight the desired value
corresponding to the flight mode and desired direction
and then press the Selector to access that value. With
the flight mode switch in the corresponding mode, give
an aileron command and rotate the Selector to achieve
the desired rudder value. Pressing the Selector will store
the value. Press the LIST button to return to the Function
Mode screen.
To Next Page
Loading...
Need help?
General
