Step #6 Turning Off the Spoiler Stick Trim
Step #7 Establishing Flight Modes
S-44
In the SYSTEM M. list, rotate the Selector until TRIM
STEP
is highlighted. Depress the Selector to access the
TRIM STEP menu. Rotate the Selector to highlight
SPOI
and press the Selector to access the spoiler trim value.
Rotate the Selector until a 0% is shown. This will turn
off the spoiler trim, preventing any unwanted interaction
with the spoiler trim and the spoiler stick. Depressing the
Selector will store the desired 0% value in the model
memory. Press the LIST button to return to the System
Mode screen.
In the
SYSTEM M. list, rotate the Selector until Devic.
SEL
is highlighted. Depress the Selector to access the
Device select menu. Initially we are going to activate three
of the available five flight modes (Launch, Cruise and
Land). Rotate the Selector to highlight
LAUN and press
the Selector to access the available switches that the
flight mode can be assigned to. For our purpose, assign
the LAUN flight mode to L3P SW (left 3-position switch).
Later you can change the flight mode to the position that
best suits your needs. Rotate the Selector until L3P SW
is highlighted and press the Selector to store the desired
left 3-position switch. Press the LIST button to return to
the System Mode screen.
To Next Page
Loading...
Need help?
General
