Juniper MX10004 - General Information; Learn With Videos

The MX10004 provides 1-Gigabit Ethernet, 10-Gigabit Ethernet, 25-Gigabit Ethernet, 40-Gigabit
Ethernet, 50-Gigabit Ethernet, 100-Gigabit Ethernet, or 400-Gigabit Ethernet modular soluons that
support up to 38.4 terabits per second (Tbps) of throughput. The MX10004 power system and the
Roung Control Board (RCB) provide redundancy and resiliency.
Benets
The MX10004 is a small-footprint complement to the larger MX10000 modular chassis, with these
benets:
• Ease of deployment—The MX10004 features a compact 7-U modular chassis for sites with limited
space or power.
• Modular, exible design—The MX10004 router uses the custom silicon line cards (2.4 Tbps, 480
Gbps, and 9.6 Tbps throughput) and power supplies found in the larger MX10000 modular chassis.
• Always-on infrastructure base—The MX10004 is engineered with full hardware redundancy for
power and host subsystems—Roung and Control Boards (RCBs)—allowing service providers to meet
stringent service-level agreements across the core.
• Nondisrupve soware upgrades—The Junos OS operang system on MX10004 supports high
availability (HA) features such as graceful Roung Engine switchover (GRES) and nonstop acve
roung (NSR).
Chassis Descripon
The MX10004 router is 7-U tall. You can install up to six MX10004 routers in a standard 42-U rack with
adequate cooling and power. All key MX10004 router components are eld-replaceable units (FRUs).
Figure 1 on page 4 illustrates the key components visible from the front of the chassis, Figure 2 on
page 4 illustrates the components that are visible from the rear of the chassis, and Figure 3 on page
3