Juniper MX10004 - Manually Remove an MX10004 Router from a Four-Post Rack

Aer moving the router to its new locaon, install the components in the chassis or store the
components in anstac bags.
Figure 103: Move the MX10004 Using a Mechanical Li
Manually Remove an MX10004 Router from a Four-Post Rack
Before you manually remove a Juniper Networks MX10004 router from a rack:
• Ensure that the rack is stable and secured to the building.
• Ensure that there is enough space to place the removed router in its new locaon and that the path
to the new locaon is clear. "MX10004 Clearance Requirements for Airow and Hardware
Maintenance" on page 87.
• Review "General Safety Guidelines and Warnings" on page 239.
• Review the chassis liing guidelines described in "Chassis and Component Liing Guidelines" on
page 247.
• Ensure that the router is safely powered o (see "Power O an MX10004 Router" on page 212).
215