Juniper MX10004 - Mount the Juniper Networks MX10004 Router Using the JNP10004-RMK-4 POST Rack-Mount Kit

Mount the Juniper Networks MX10004 Router
Using the JNP10004-RMK-4POST Rack-Mount Kit
You can mount a Juniper Networks MX10004 router in a four-post closed-frame rack or a four-post
open-frame rack by using a rack-mount kit. The rack-mount kit (part number JNP10004-RMK-4POST)
ships with the router by default. This topic explains how to mount the router.
The router chassis weighs approximately 123 lb (56 kg) with only the fan tray controllers installed.
You can mount an MX10004 manually or by using a mechanical li. Because of the router's size and
weight, we strongly recommend that you use a mechanical li to mount the MX10004.
If you are mounng the router by using a li, ensure that you have a mechanical li rated for 250 lbs
(113.4 kg).
If you are mounng the router manually, ensure that at least three people are available to li the chassis
together.
Before you mount the MX10004 router:
• Prepare the site for installaon as described in "MX10004 Site Preparaon Checklist" on page 80.
• Unpack the router as described in "Compare the MX10004 Router Order to the Packing List" on page
112.
• Review the chassis liing guidelines in "Chassis and Component Liing Guidelines" on page 247.
Ensure that you have the following parts and tools available:
• Twenty eight rack-mount screws appropriate for your rack to secure the mounng blades, mounng
tray, chassis, and safety restraint to the rack (not provided)
• A Phillips (+) screwdriver, number 1, 2, or 3, depending on the size of your rack-mount screws (not
provided)
The rack-mount kit consists of the following components:
• One mounng tray
• Two mounng blades
• One safety restraint
• 12 Phillips 8-32 x .375 at-head screws
120