Juniper MX10004 - Alarm Messages; Understanding Alarms

Alarm Messages
IN THIS SECTION
Understanding Alarms | 219
Interface Alarm Messages | 221
Understanding Alarms
The Juniper Networks MX10004 router supports dierent alarm types and severity levels. Table 53 on
page 219 provides a list of alarm terms and denions that can help you in monitoring the device.
Table 53: Alarm Terms and Denions
Term Denion
Alarm Signal alerng you to condions that might prevent normal operaon. On the device, alarm
indicators might include the LCD panel and LEDs on the device. The LCD panel (if present on the
device) displays the chassis alarm message count. Blinking yellow LEDs indicate minor alarm
condions for chassis components.
Alarm
condion
Failure event that triggers an alarm.
219