Juniper MX10004 - MX10 K-LC9600 Line Card

MX10K-LC9600 Line Card
The MX10K-LC9600 (Model number: JNP10K-LC9600) is a xed-conguraon 24-port line card that
provides a line-rate throughput of 9.6 Tbps. The line card has twenty-four QSFP ports, each capable of
supporng a maximum speed of 400 Gbps.
Figure 32: MX10K-LC9600
1—
QSPF Ports
3—
Lane LEDs
2—
Ejector Handles
4—
PWR, STS, and OFF LEDs
The MX10K-LC9600 line card combines Packet Forwarding Engines based on custom ASICs by Juniper
Networks. The line card has six fowarding ASICs, each hosng two Packet Forwarding Engines.The line
card has 12 Packet Forwarding Engines, each providing a maximum bandwidth of 800 Gbps.
You can channelize the ports using breakout cables to speeds of 400 Gbps, 200 Gbps, 100 Gbps, 50
Gbps, 40 Gbps, 25 Gbps, or 10 Gbps.
The 9.6-Tbps line card is designed to operate only with the following components:
• JNP10004-SF2 and JNP10008-SF2 switch fabric
• JNP10K-PWR-AC2 or JNP10K-PWR-DC2 power supplies
• The JNP10008-FAN2 fan tray
• The JNP10008-FTC2 fan tray controller
• JNP10004-FAN2 fan tray
• JNP10004-FTC2 fan tray
74