Juniper MX10004 - MX10004 Field-Replaceable Units

Table 4: MX10004 Router Physical Specicaons (Connued)
Descripon Weight Height Width Depth
MX10K-LC9600
Line Card
27 lb (12.24 kg) 1.89 in. (4.8 cm) 17.2 in. (43.68 cm) 19.05 in. (48.3 cm)
(excluding FRU
ejector)
MX10004 Field-Replaceable Units
Field-replaceable units (FRUs) are router components that you can replace at your site. The router uses
the following types of FRUs:
• Hot-insertable and hot-removable—You can remove and replace these components without powering
o the router or disrupng the roung funcon.
• Hot-pluggable—You can remove and replace these components without powering o the router, but
the roung funcon is interrupted unl you replace the component.
Table 5 on page 21 lists the FRUs and their types for the MX10004 routers.
Table 5: FRUs in a MX10004
FRU Type
Power supplies Hot-insertable and hot-removable.
Fan trays Hot-insertable and hot-removable.
Fan tray controllers Hot-insertable and hot-removable.
21