Juniper MX10004 - MX10004 Routing and Control Board Maintenance

9. Re-insert the protecve plasc covers on the fabric interface connectors of the SFB to keep the
connectors clean and free of dust and other parcles (see Figure 83 on page 185).
Figure 83: Insert the Protecve Plasc Covers on the JNP10004-SF2 SFB Interface Connectors
MX10004 Roung and Control Board Maintenance
SUMMARY
Maintaining a Juniper Networks MX10004 router
includes removing and installing the Roung and
Control Board (RCB).
IN THIS SECTION
Handle and Store Roung and Control Boards
Properly | 186
Install an MX10004 Roung and Control
Board | 187
Remove an MX10004 Roung and Control
Board | 189
185