Juniper MX10004 - Page 26

Table 3: CLI Equivalents of Terms Used in Documentaon for MX10004 Routers (Connued)
Hardware
Item (CLI)
Descripon (CLI) Value (CLI) Item in
Documenta
on
Addional Informaon
FPC ( n ) Abbreviaon for
the Flexible PIC
Concentrator (FPC)
On MX10004, an
FPC is equivalent
to a line card.
The variable n is a
value in the range of
0–3 for the MX10004.
The value corresponds
to the line card slot
number in which the
line card is installed.
Line card Understanding Interface
Naming Convenons
PIC ( n ) Abbreviated name
of the Physical
Interface Card
(PIC).
The variable n is a
value in the range of
0–5.
– Understanding Interface
Naming Convenons
PEM ( n ) Abbreviaon for
power supply
module
One of the
following:
• JNP10K-PWR-
AC2
• JNP10K-PWR-
DC2
The variable n is a
value in the range of
0–2. The value
corresponds to the
power-supply slot
number.
AC, DC, or
HVDC power
supply
One of the following:
• "JNP10K-PWR-AC2 Power
Supply" on page 38
• "JNP10K-PWR-DC2 Power
Supply" on page 50
Roung
Engine
RE ( n ) The variable n is a
value in the range of
0–1.
Mulple line items
appear in the CLI if
more than one RCB is
installed in the chassis.
RCB "MX10004 Roung and
Control Board Components
and Descripons" on page 56
16