Juniper MX10004 - Page 289

This is a Class A product. In a domesc environment this product may cause radio interference in which
case the user may be required to take adequate measures.
VCCI-A
Korea
The preceding translates as follows:
This equipment is Industrial (Class A) electromagnec wave suitability equipment and seller or user
should take noce of it, and this equipment is to be used in the places except for home.
United States
The MX10004 devices have been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protecon against
harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instrucon manual, may cause harmful interference to radio communicaons. Operaon of this
equipment in a residenal area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
Nonregulatory Environmental Standards
These MX10004 is designed to be Network Equipment Building System (NEBS) compliant:
Those device product SKUs are designed to meet the following NEBS compliance standards:
279