Juniper MX10004 - Page 5

Calculate the Fiber-Opc Cable Power Margin for an MX10004 Router | 99
MX10004 Alarm and Management Cable Specicaons and Pinouts | 101
Console Port Connector Pinouts for an MX10004 Router | 101
USB Port Specicaons for the MX10004 Router | 102
Management Port Pinouts for the MX10004 Router | 103
RJ-45 Connector Pinouts for the External Clock Ports | 104
3
Inial Installaon and Conguraon
MX10004 Installaon Overview | 107
Unpack the MX10004 Router | 108
Unpack the MX10004 Shipping Pallet | 108
Unpack Line Cards, Roung Control Boards, and Switch Fabric Boards for the MX10004
Router | 111
Compare the MX10004 Router Order to the Packing List | 112
Register Products—Mandatory to Validate SLAs | 119
Mount the Juniper Networks MX10004 Router Using the JNP10004-RMK-4POST Rack-
Mount Kit | 120
Install the Front Door on an MX10004 Router | 127
Install a Front Door Without the Air Filter on an MX10004 Router | 128
Install a Front Door with Filter | 130
Connect the MX10004 to Power | 134
Connect the MX10004 Router to Earth Ground | 135
Connect AC Power to an MX10004 Router | 137
Connect DC Power to an MX10004 Router | 138
Connect the MX10004 Router to External Devices | 139
Connect an MX10004 Router to a Network for Out-of-Band Management | 139
Connect an MX10004 Router to a Management Console | 140
Perform the Inial Conguraon for the MX10004 Router | 141
v