Juniper MX10004 - Page 76

Table 27: JNP10004-SF2 SFB Specicaons (Connued)
Specicaon JNP10004-SF2
Supported line cards
1. MX10K-LC2101
2. MX10K-LC480
3. MX10K-LC9600
Number of SFBs required for
maximum throughput
Based on the line card installed:
1. MX10K-LC2101 - 5+1 (fabric redundancy)
2. MX10K-LC480 - 5+1 (fabric redundancy)
3. MX10K-LC9600 - 6+0 (no fabric redundancy)
Switching Capacity When all six SFBs are installed, based on the line card installed, the MX10004
has a net switching capacity of 38.4 Tbps.
Height 9.43 in. (23.95 cm)
Width 1.77 in. (4.48 cm)
Depth 13.4 in. (34.6 cm)
Weight 8 lb (3.6 kg)
66