Juniper MX10004 - Page 86

Hardware features
• Is a xed-conguraon line card with 400-Gbps, 200-Gbps, 100-Gbps, 50-Gbps, 40-
Gbps, 25-Gbps, or 10-Gbps port speeds.
• Oers line-rate throughput of up to 9.6 Tbps.
• Includes twelve Packet Forwarding Engines, each allows for a maximum bandwidth of
800 Gbps.
• Is compable with the JNP10004-SF2 and JNP10008-SF2 switch fabric boards.
• Interoperates with the MX10K-LC2101 and MX10K-LC480 line cards.
• Operates with the JNP10K-RE1, JNP10K-RE1-LT, and JNP10K-RE1-128G Roung
and Control Boards.
•
Operates only with the following power supplies and fan trays:
•
JNP10K-PWR-AC2
•
JNP10K-PWR-DC2
• JNP10008-FAN2
• JNP10008-FTC2
• JNP10004-FAN2
• JNP10004-FTC2
• Supports a maximum transmission unit (MTU) ranging from 274 bytes through
16,000 bytes for transit trac. Supports an MTU from 274 bytes through 16,000
bytes for host-bound packets.
Soware features
• Supports rate selectability at the port level.
• By default, the ports are congured as 400-Gigabit Ethernet ports.
• Supports opcal diagnoscs and related alarms.
Power requirements Power consumpon at dierent temperatures when all ports are congured in 400-Gbps
speed:
• 25° C: 1655 W
• 40° C: 1770 W
76