6-15
TO CARE THE WINDSCREEN
Wiper brushes should bear against glass surface
along the whole length of edge, they must shift uniformly,
without seizure.
Test the washer operability and, if necessary,
ad-
just the direction of water by cleaning and adjusting the
jet. Direction of water jet is adjusted with the help of
needle arranged in jet orifice.
Attention!
Avoid wiper sliding along dry windscreen.
At ambient air temperature below zero the work
of windshield wiper with brushes frozen to the window
is prohibited.
If the information about the low liquid level in a
washer tank is displayed, prime the tank with ready-
made washing liquid.
The washer tank is placed under the cab from the
driver side, the filling neck is inserted into the door open-
ing (see Fig. Washer tank
).
In cold season, prime system with glass-washing
liquid
with low freezing temperature.
Attention!
Do not use concentrated glass detergent, it
should be diluted with water to avoid paint coating void.
1 - tank filler cover;
2 - filling neck
To Next Page
Loading...