4-40
DIGITAL TACHOGRAPH
On the shelf over the windshield a digital tacho-
graph is installed.
Digital tachograph – technical control device, de-
signed for registration, storage, display, printing of data
about the mode of movement, labour and rest of the driver
(see Operation manual of tachograph manufacturer).
Tachograph is designed to be used by one or two
drivers.
Vehicle manufacturer temporarily seals tachograph
during its installation.
Further, after tachograph adjustment, the work-
shop, carrying out activities on installation, check,
maintenance and repair of tachograph, seals it.
GLOVE COMPARTMENTS AND BOXES
It is not recommended to carry over heavy things
in the compartments.
Attention!
In order to prevent injury of people by things
falling at hard vehicle braking, all glove boxes and ad-
ditional compartments for accessories should be closed
and locked during the motion.
TERMINAL FOR POWER OF RADIO RECEIVER
On the vehicles the overhead console is prepared for
installation of the radio receiver with the input voltage 24 V
(radio recorder, multimedia system).
For connection of the radio receiver to the vehi-
cle network and to the loudspeakers, the terminal is
provided in the overhead console, standard ISO 10487.
Attention!
Connection of the radio receiver with inlet volt-
age 12 V is forbidden, as it may cause the radio receiver
failure.
ISO 10487
Shelf over the windshield
1
- digital tachograph
To Next Page
Loading...