4-14
Bunk
ADJUSTMENT OF HEADLAMP INCLINATION ANGLE
Adjuster of headlamp inclination angle is located
on instrument panel (see Fig. Adjuster of headlamp
inclination angle).
Adjustment is carried out in accord with vehicle
load.
Adjuster position
0 - Vehicle is not loaded.
1-3 - From partial vehicle load to loaded vehicle.
Headlamp inclination angle is to be adjusted in
such a way when headlamp beam doesn't blind the
drivers of oncoming vehicles.
Pos.
Application of shifters
1 Reading lamp on the bunk
2 Opening/ closing of top hatch
3
Remote engagement/ disengagement
of autonomous cab heater
inclination angle
To Next Page
Loading...