KAMAZ 5490 - Heating; Ventilation; Program

12
After pressing and holding LONGPRESS
for
more than 2 seconds heating mode starts immediately.
After pressing and holding LONGPRESS
for
more than 2 seconds all functions are completed.
9.4 HEATING
Immediate heating/ LONGPRESS.
Press and hold the button
for more than 2 sec-
onds.
Heating On/ SHORTPRESS.
Press and hold the button
for less than 2 sec-
onds, confirm set temperature and operating time with
the button
or set them using the buttons .
Confirm the setting using the button
.
Heating Off/ LONGPRESS.
Press and hold the button
for more than 2 sec-
onds, all activated functions are completed.
Heating Off/ SHORTPRESS.
Press and hold the button
for less than 2 sec-
onds the function Heating On will be completed.
9.5 VENTILATION
Ventilation On
On the menu bar use the buttons
to select
the symbol
and confirm with the button , confirm
duration of the operation using the button
or set using
the buttons
. Confirm the setting using the button
.
Ventilation On/ LONGPRESS.
Press and hold the button
for more than 2 sec-
onds, all activated functions are completed.
Ventilation Off/ LONGPRESS.
Press and hold the button
for less than 2 sec-
onds, the function Ventilation On will be completed.
9.6 PROGRAM
Programming of setting time.
Please note!
If the symbol « » is not displayed in the menu
bar, the heater is in ADR mode (transportation of dan-
gerous goods), pre-set heating mode is not possible in
this case.