KAMAZ 5490 - Table of Additional Technical Data

2-2
TABLE OF ADDITIONAL TECHNICAL DATA
Operational data
Model
5490
Technically permissible maximum weight of vehicle, kg, applied to:
axle 1
7100
axle 2
11500
Maximum driving speed
1)
, km/h, at least: train 90
2)
Test fuel consumption
3)
per 100 km at speed 60 km/h, l, not more:
train
27,5
Fuel distance endurance
1) 4)
, km, at least:
train
2800
Acceleration time
1)
to 80 km/h, s, not more:
train
80
Braking distance
1)
at service brake system application during test
«Type-0» (with engine disconnected), with initial brake speed
60 km/h, m, not more:
vehicle 36,7
The same, with a stand-by brake system applied, with initial brake
speed 40 km/h, m, not more:
vehicle 33,8
Outer vehicle turning radius between walls (front buffer), m, not more:
8
Fuel tanks’ capacity
5)
, l
400х2; 665
____________________________
1)
Parameters are given for vehicle with technically permissible maximum weight.
2)
The value is limited by vehicle software.
3)
Test fuel consumption is measured in accord with GOST Р 54810-2011 for vehicle with technically permissible maximum
weight, travelling with constant speed along special test section, serves for determination of truck (train) technical state and is
not a performance norm.
4)
fuel distance endurance at test fuel consumption is determined by calculations and depends upon fuel tanks' capacity, in the
table it is indicated for fuel tanks with total capacity 800 l.
5)
Usage of fuel tanks depends upon vehicle configuration.