4-15
LIGHT SHIFTER
Vehicle light is switched on and off by light
shifter. Prior light energizing, rotate the ignition key to
position «ON» (motion position).
LIGHT FOR MOVEMENT IN THE DAYTIME
Daytime running lights switch on automatically
when ignition key is shifted to «ON» position. Light
shifter is in «
0» position.
Daytime running lights are switched off when low
or high beams or auxiliary illumination headlamps are
engaged in insufficient visibility conditions.
END-OUTLINE AND SIDE MARKER LAMPS
To engage the end-outling and side marker lamps,
shift the light switch to position
. With this number
plate light and switch illumination are energized.
LOW BEAM
Turn the light switch to position .
HIGH BEAM
1. Turn on the low beam: turn the light switch
to position
.
2. Shift combination switch forward till fixation
(see Section «Combination switch»). Pilot lamp will light
on the instrument panel
.
High beam switches on only after low beam
engagement.
0
Light is switched on/ off for movement during the
daytime
End-
outline lamps, marker lamps, number plate
light and switch illumination are engaged
Low/ high beam (depending on combination switch
location)
Pilot LED indicating auxiliary illumination
headlamps engagement in insufficient visibility
conditions (color - green)
Pilot LED indicating rear fog lamps engagement
(color - orange)
- light shifter; 2, 3 - light switch steps
To Next Page
Loading...