KAMAZ 5490 - Page 18

2-7
Manufacturer’s plate for export vehicle
The manufacture’s plate is fixed to the cab r.h.
panel in a door aperture.
Plate contains (see Fig. Manufacturer’s plate for
export vehicle):
- manufacturer’s name;
- e - European approval;
- d - distinguishing number or letters of the coun-
try which gave the vehicle EEC type approval;
-f - EEC type approval number;
- identification number, including:
- XTC - manufacturer index;
- а - vehicle model conventional code pursuant
to Technical specifications for vehicle, comprising six
marks;
- b - production year code (1 mark);
- с - vehicle ordinal number (7 marks).
Permissible weights allowed for registration:
- m* - vehicle gross weight;
- m
1
* - train gross weight (for tractors);
- Р
1
* - permissible front axle load;
- Р
2
* - permissible second axle load;
- Р
3
* - permissible third axle load;
- Р
4
* - permissible fourth axle load;
- manufacturer’s trade mark .
In accord with EU Regulations 19/2011 the letter
«Т» is added as a suffix to the maximum load on each
axle being a part of this axle group (tandem).
Technically construction-permissible weight pa-
rameters:
- m - vehicle gross weight permissible by construc-
tion;
- m
1
- train gross weight (for tractors), permissible
by construction;
- Р
1
- permissible by construction front axle load;
- Р
2
- permissible by construction second axle load;
- Р
3
- permissible by construction third axle load;
- Р
4
- permissible by construction fourth axle load.
Engine parameters:
-g - engine ordinal number;
- k - engine model;
- n - engine net power.
Manufacturer’s plate for export vehicle