6085 758 102b - 2006-10
17
• Deactivation of the constant braking step operations
The braking step lever is either
- in the position 0 or
- in the position B = BREMSOMAT function and/or
BREMSOMATIC function
(applications depend upon the
vehicle manufacturer).
NOTES
• If the required braking performance is greater than
the maximum braking performance of the Intarder,
then, additionally, the engine or service brakes must be
actuated.
• Please consider Chapter 1, General Safety Instructions
Intarder.
Constant braking step operations
To Next Page
Loading...