Keba KeDrive D3-DU 3 A Series User Manual

D3-DU 3xx/A, /BOperating behavior
Project engineering manual V1.09
86
© KEBA 2021
1. Level 2. Level 3. Level 4. Level Description
Firmware
Update
Are you
sure?
Confirm execution
Firmware
Update
Executing
<n>...
Firmware update on the device <n>
is performed
Firmware
Update
Restarting
<n>...
Restart of the respective device
<n> after a firmware update
The following states can be dis-
played:
● Firmware Update OK:
Successfully completed.
● Firmware Update
Failed <n>: An error has
occurred on the device <n>.
The update is canceled.
● Firmware Update
Restart Failed <n>:
An error occurred when
restarting device <n>. The up-
date is aborted.
Drives-1
Service
Firmware
Update
with re-
stored
ParamSet
Firmware
Update
with re-
stored
ParamSet
<Location>
Performing a firmware update for all
drives
The parameter set is saved before
the firmware update and imported
again after the firmware update.
EoE must be enabled for this com-
mand.
Locations:
● local: on CFast card of the
control under root/appld-
isk/application/
drive/drive
● /media/usb<x>: on USB
stick (x: number of the USB
port of the control)
Firmware
Update
with re-
stored
ParamSet
n.a.
No (valid) firmware file was found in
the directory.
Select
Firmware
<Filename>
Firmware file selection
The following file names are valid:
● DriveFirmware.tftp-
com
● D3_DA_FW_[..].tftp-
com

Keba KeDrive D3-DU 3 A Series Specifications

General

Brand	Keba
Model	KeDrive D3-DU 3 A Series
Category	Control Unit
Language	English