Keba KeDrive D3-DU 3 A Series User Manual

D3-DU 3xx/A, /BOperating behavior
Project engineering manual V1.09
88
© KEBA 2021
1. Level 2. Level 3. Level 4. Level Description
Drives-1
Service
Backup
ParamSet
Backup
ParamSet
<Location>
Performing a backup of the param-
eter sets of all drives and saving
them under the specified location
EoE must be enabled for this com-
mand.
Locations:
● local: on CFast card of the
control under root/appld-
isk/application/
drive/drive
● /media/usb<x>: on USB
stick (x: number of the USB
port of the control)
The following files are automatically
used, where <ip> is the EoE IP ad-
dress of the drive and <alias> is the
configured device name:
DriveParam-
Set_<ip>_<alias>.csv
Backup
Paramset
Executing
<n>...
Backup for the drive <n> is per-
formed
The following states can be dis-
played:
● Backup ParamSet Ok:
Successfully completed for all
drives.
● Backup ParamSet
Failed <n>: A drive <n>
error has occurred.
Drives-1
Service
Restore
ParamSet
Restore
ParamSet
<Location>
Restore the parameter sets for all
drives from the specified storage lo-
cation
EoE must be enabled for this com-
mand.
Locations:
● local: on CFast card of the
control under root/appld-
isk/application/
drive/drive
● /media/usb<x>: on USB
stick (x: number of the USB
port of the control)
The following files are automatically
used, where <ip> is the EoE IP ad-
dress of the drive and <alias> is the
configured device name. Only the
first existent file is used for each
drive:
DriveParam-
Set_<ip>_<alias>.csv
DriveParamSet_<ip>.csv

Keba KeDrive D3-DU 3 A Series Specifications

General

Brand	Keba
Model	KeDrive D3-DU 3 A Series
Category	Control Unit
Language	English