109
Keysight Handheld Analyzers
N99xxA User’s Guide
7 Time Domain – Option 010
With NA Mode, Time Domain (Opt 010), frequency information is used to
calculate and display measurements with time as the horizontal display axis.
The response values appear separated in time allowing a different perspective
of the test device's performance and limitations.
NA Mode settings that are NOT unique to Time Domain are documented in
Chapter 6, “NA (Network Analyzer) Mode”, on page 85.
In This Chapter
Time Domain (Transform) Settings
Trace Settings
“Overview” on page 111
“Transform Settings Table” on page 112
“Start/Stop (Frequency Range) and Points” on page 112
“Stimulus (Mode)” on page 113
“Set Frequency Lowpass” on page 113
“Start/Stop Time” on page 113
“Distance Units” on page 114
“Window Layout” on page 114
“Transform Window” on page 114
“Line Loss and Velocity Factor” on page 115
“Data Chain” on page 116
“Gating Type” on page 119
“Transform Enable” on page 117
“Gate Enable” on page 117
To Next Page
Loading...
Need help?
General
