Data Analysis Features
All about Markers
612 Keysight N9927-90001 User’s Guide
— More then:
— Mkr->Start Distance
The Start Distance of the measurement becomes the value of the active
marker. Markers that would no longer appear on the screen are moved to the new Start
Distance.
— Mkr->Stop Distance
The Stop Distance of the measurement becomes the value of the active
marker. Markers that would no longer appear on the screen are moved to the new Stop
Distance.
I/Q Analyzer (IQA) Marker Functions
The following Marker Functions are available in I/Q Analyzer Mode ONLY (exceptions are noted):
— Noise Marker (Available in SA mode)
— Band/Interval Power Marker (Available in SA mode)
— Coupled Markers
— Band Span
— Interval Band Span
—Continuous Peak Search
Learn more about Noise and Band/Interval Power marker functions starting in the IQA chapter here:
“Noise Marker” on page 276.
SA Marker Functions
The following Marker Functions are available in SA Mode ONLY (exceptions are noted):
— Noise Marker (Available in I/Q Analyzer mode)
— Band/Interval Power Marker (Available in I/Q Analyzer mode)
— Frequency Counter at Marker
— Audio Beep with Marker
— Time Zero Fixed Marker
Learn more about these marker functions starting in the SA chapter here: “Noise Marker” on
page 191.
To Next Page
Loading...
Need help?
General
