Keysight N9927-90001 User’s Guide 701
Safety Considerations
For the Battery
Standard Capacity Battery (N9910X-870)
Do not discharge the battery using any device except the FieldFox
or the external battery charger (N9910X–872). When the battery is
used in a device other than those specified, it may damage the
battery or reduce its life expectancy. If the device causes an
abnormal current to flow, it may cause the battery to become hot,
explode, or ignite and cause serious injury.
The external battery charger discharges during recalibration.
For a Korean battery safety consideration translation, refer to
Appendix D:, “Korean Battery Safety Translation.”
For a Russian battery safety consideration translation, refer to
Appendix E:, “Russian Battery Safety Translation.”
The external battery is not rated for use in a wet location. Do not use
the external battery in a wet location.
Lithium–ion batteries:
— Must not be exposed to high temperatures (>70°C) or fire.
— Must be kept away from children.
— Must not be short circuited.
— Must be replaced only with Keysight qualified Li–ion batteries.
— If replaced or charged improperly, there is a danger of explosion.
Do not connect the positive terminal and negative terminal of the
battery to each other with any metal object (such as wire).
Do not carry or store the battery with necklaces, hairpins, or other
metal objects.
Do not pierce the battery with nails, strike the battery with a
hammer, step on the battery, or otherwise subject it to strong
impacts or shocks.
Do not solder directly onto the battery.
Do not expose the battery to water or salt water, or allow the
battery to get wet.
To Next Page
Loading...
Need help?
General
